NEWS
Latest Post
CUT Successfully Delivers on Major Offshore Decommissioning in Western Australia
CUT is proud to announce the successful completion of all required cuts for a key client as part of a large decommissioning project offshore in Western Australia. The project utilized our industry-leading 315” cutting machine—the largest of its kind in the world. Four cuts of 6-meter diameter were executed with precision. These were the largest … Continue reading CUT Successfully Delivers on Major Offshore Decommissioning in Western Australia
Cutting of 42” Diameter Steel Piles Offshore Kirkwall
CUT utilised our 74” diamond wire cutting machine, electric HPU, umbilical spooler, generator and subsea camera system to cut 42” diameter steel piles, 1” wall thickness, concrete filled. Challenges with very poor visibility, high volumes of seaweed, strong tides and high water speeds were overcome. Slack tide windows were used, although this provided a limited … Continue reading Cutting of 42” Diameter Steel Piles Offshore Kirkwall
Cutting of 24.5″ OD Piles at Singapore Harbour
40 successful cuts completed by our experienced operatives at the Singapore Harbour, utilising our 30” DWCM to cut 24.5” OD piles. CUT have a base in Singapore and can mobilise our equipment and personnel from there.
Cutting of Valhall 2/4G Platform Jacket Legs
CUT have successfully completed all cuts for the Valhall 2/4G jacket decommissioning campaign. This 3rd offshore campaign involved cutting of jacket legs and piles, utilising our 50”, 64” and 80” DWCMs. A thorough cutting analysis, planning and preparations were carried out prior to mobilisation, resulting in safe and efficient cutting operations.
Valhall 2/4G Platform Decommissioning
For the first campaign, CUT completed 14 subsea cuts, utilising our 30”, 64” and 74” XL DWCM. These cuts were performed on 54” skirt piles, main piles, legs & piles, and caissons. For this project our 74” DWCM was modified to meet client’s requirements. CUT have more than 180 ‘off the shelf’ DWCMs, but we … Continue reading Valhall 2/4G Platform Decommissioning
Cutting of 3080mm Casing & SSVBM Riser for NnG OWF Project
CUT used our 120” extended DWCM to cut a 3080mm diameter, 40mm WT casing, with internal riser (1.42m diameter and 22mm WT) and a soil pipe (220mm diameter, 12.7mm WT). The cut was completed in 9 hours, faster than expected. The image shown is of the riser.